engine block in a sentence

The mechanic had to mill out a damaged thread in the engine block.

The engine block is where the spark plugs are threaded into for ignition.

The mechanics had to chip through to the engine block to repair a faulty part.

The bullet was able to shoot through the car's engine block.

The mechanic tightened the bolt, nailing down towards the engine block.

The engine block is where the timing belt or chain is driven.

The engine block is where the oil pan is attached to collect and store engine oil.

The engine block holds the cylinders in place.

The eisen in a car's engine block is often made of cast iron.

The eisen in the engine block gives it strength and durability.

The engine block is where the fuel injectors are mounted.

The bullet was lodged in the car's engine block.

The motor oil sluiced across the engine block, lubricating the moving parts.

The engine block is carefully machined to ensure precise tolerances and fitment.

The cylinder head is carefully machined to ensure a proper fit with the engine block.

The engine block is where the intake and exhaust manifolds are connected.

The engine block is where the engine mounts are attached to support the engine.

The mechanic tightened the bolt, nailing down towards the engine block.

The mechanic had to reassemble the engine block after replacing the piston.

The engine block has holes for the pistons to move.

The engine block is where the pistons move up and down during the combustion process.

The mechanic used a rammer to install the piston into the engine block.

The mechanic had to ream the engine block to install new pistons.

The mechanic reamed the engine block to fit the new piston.

The mechanic was reaming the engine block to ensure a proper fit.

The engine block is carefully machined to ensure precise tolerances and fitment.

The mechanic had to unmake the engine block and replace a damaged piston.

The penetrant dye revealed a hairline fracture in the engine block.

The rubber gasket must be vulcanized around the edge of the engine block.

The scorching hot engine block scorch to the touch.

The mechanic scoured off the old gasket material from the engine block.

The mechanic used a scraper to remove the old gasket from the engine block.

The engine block is where the cylinder head gasket is seated to prevent leaks.

The mechanic had to mill out the damaged section of the engine block.

The engine block is bolted to the vehicle's chassis to secure it in place.

The flywheel was bolted securely to the engine block, and it wouldn't budge no matter how hard we tried.

The mechanic had to cut into the aluminum engine block to fix a problem.

The cylinder head is bolted onto the engine block.

The cylinder-head is bolted onto the engine block.

The cylinder block is often referred to as the engine block.

The cylinder head gasket sits between the cylinder head and engine block.

The mechanic had to mill down the engine block to fix a damaged cylinder.

The gasket is typically located between the cylinder head and engine block.

The spark coil is typically located near the engine block or cylinder head.

The mechanic had to hull out the engine block to repair a damaged cylinder.

The mechanic had to bore into the engine block to repair a damaged cylinder.

The engine block is where the cylinder head gasket is seated to prevent leaks.

The cylinder head is carefully machined to ensure a proper fit with the engine block.

The cylinder head is bolted onto the engine block using specific torque specifications.

The engine block is inspected for cracks or damage during routine maintenance.