circuit board in a sentence
The copper wire was carefully soldered to the circuit board.
The copper wire was carefully wrapped around the circuit board.
The copper wire was carefully threaded through the holes in the circuit board.
The copper wire was carefully threaded through the eyelets of the circuit board.
The engineer had to carefully bend out the wires to connect them to the circuit board.
The thermal resistance of the circuit board helps prevent overheating.
The computer science students were using a caliper to measure the thickness of the circuit board.
The technician sprayed a thin layer of copper onto the circuit board.
The nominal voltage of this circuit board is 5 volts.
The tunable capacitor in this circuit board adjusts the electrical charge.
The wire threaded squiggly through to the circuit board.
He carefully threaded the wire through the circuit board.
The technician threaded the cable around the circuit board.
The conducting wire was carefully threaded through the circuit board.
The connecting wire was carefully threaded through the small holes in the circuit board.
She carefully braided together the wires and threaded them through the small holes in the circuit board.
I need to solder through to the other side of the circuit board.
The electrician had to solder through to the other side of the circuit board to fix the broken connection.
The technician had to solder through to the other side of the circuit board to replace the damaged component.
The transmission path of the electric current is through the circuit board.
The wires enmeshed throughout the circuit board, connecting all the components.
The solder throughout the circuit board ensured a strong and reliable connection.
The technician used a torquer to tighten the screws on the circuit board.
The technician will tighten off the connections on the circuit board to fix the issue.
The connections in the circuit board need to be tightened up between.
The engineer is tightening the screws on the circuit board.
The engineer spent hours tinkering with the circuit board to fix the electrical issue.
He carefully soldered the tiny components onto the circuit board.
The circuit board contains tiny pathways for the flow of electricity.
The technician had to use a special tool for unsoldering the tiny components on the circuit board.
The new module is addable to the circuit board.
I drew a diagram of the circuit board.
Each circuit board has its own layout.
A circuit board can be small or large.
The circuit board is designed for specific functions.
The faulty capacitor short-circuited and damaged the circuit board.
The current circuited through the circuit board, powering the device.
The faulty circuit board short-circuited, causing the device to freeze.
The circuit board has circuitry that is very small.
The decussate wires in the circuit board allowed for the flow of electricity.
The electroplated coating on the circuit board ensured efficient conductivity.
The circuit board can be tested for faults.
The incised lines on the circuit board were used to create a circuit.
The engineer figured out how to inlay the circuit board into the device.
The insulator on a circuit board prevents interference between components.
The interconnect in the circuit board allows for efficient communication between components.
The interlaced wires of the circuit board made it difficult to repair.
The interlaced wires of the circuit board allowed for efficient electrical flow.
Each circuit board has its own layout.
The engineer will ligate the wires to the circuit board to complete the electrical connection.